nautilus / nitro s3 parts s3lp

• Kevlar Belt is Non-Returnable. All sales are final.
• Belting can be cut to desired length using a straightedge and a olfa utility knife or box cutter with a new blade

Compatible to:

• Startrac OEM 24-6045 (STS1726), 4800-0061 or 18-0035 (STS1726)

Specifications:

• 1/8" Thickness
• 1-1/4" Width
• Sold by the foot
• Tensile Strength = 6250 lbs

Item Notes:

• Important:  DO NOT use this belting on Low Row or Lat Pull-down machines.  Use MC0006 Polyamide belting only on Low Row and Lat Pull-down machines.
• Manufacturer rates tensile at 5,000 Lbs. Strength.
• Kevlar belting must be replaced annually or per the maintenance schedule of the original equipment manufacturer. 
• Never double-over, fold or twist the belting.  Doing so weakens the Kevlar strands.

NEVER use Kevlar belting on Lat-Pull or Low-Row machines, here's why:

• Kevlar belting fails catastrophically. Although strong, Kevlar belting does not show signs of wear like cable or polyamide belting.  When it fails it fails catastrophically typically when being used by the strongest users. Catastrophic failure can and has caused severe user injury and even death. 
• Both the Lat-Pull and Low-Row selectorized machines pull the weight toward the user.  If/when the Kevlar belt fails it can impale the user with the attachment (in the case of Lat-Pull) or hurl the user back (in the case of the Low-Row).  Users have been seriously injured and killed from Kevlar belt failures on these machines.  
• Polyamide belting is recommended for all Lat-pull and Low-Row applications.  Unlike Kevlar belting, polyamide belt does not fail catastrophically. It elongates and deforms first giving the user the opportunity to replace it and avoid serious injury.
•   Most OEMs including Life Fitness, Cybex, Body Master and others recommend using Polyamide belting for Lat-Pull and Low-Row applications.